At 800W capacity, the F 457 motor is the most powerful drive option we have. The compact design has an optimal cooling path with low noise output. An integrated no-volt release that prevents an accidental start-up after a power loss guarantees user safety. Also available as the F 457 EL with electronic speed adjustment to vary the flow rate of the pump.

Our ACS dry screw pumps can be cleaned in-place with no disassembly via a solvent flush and our purpose-built solvent trap. Clean out your pump as often as every processing run to significantly increase the life of the pump. Always make sure to take proper safety precautions for your tool and application.HIGHVAC’s ACS series Air Cooled Dry Screw Vacuum Pumps offer a new option for small dry pumps. Dry screw type vacuum pumps simplify the gas path, reducing pump failure due to contaminant build up. Reliability, ease of maintenance, and long life cycle are all factors that contribute to making this the pump technology of choice for the botanical extraction industry. ACS 60 60 m3/hr (30 cfm) Ultimate Pressure: 2×10-3 Torr (.27 Pa) Motor Power: 1.5 kW (2.0 hp) Weight: 121 lbs (55 kg)

2" ID PVC HOSE, 2" TC CONNECTIONS, HD PLIOVIC HELIX REINFORCED, 6 FOOT OVERALL LENGTH, FDA, 3A, USDA, NSF-61, INCLUDES PTFE GASKETS AND CLAMPS

Our ACS dry screw pumps can be cleaned in-place with no disassembly via a solvent flush and our purpose-built solvent trap. Clean out your pump as often as every processing run to significantly increase the life of the pump. Always make sure to take proper safety precautions for your tool and application.HIGHVAC’s ACS series Air Cooled Dry Screw Vacuum Pumps offer a new option for small dry pumps. Dry screw type vacuum pumps simplify the gas path, reducing pump failure due to contaminant build up. Reliability, ease of maintenance, and long life cycle are all factors that contribute to making this the pump technology of choice for the botanical extraction industry. ACS 100 96 m3/hr (57 cfm) Ultimate Pressure: 2×10-3 Torr (.27 Pa) Motor Power: 2.2 kW (3.0 hp) Weight: 141 lbs. (64 kg)

SANITARY DISCHARGE SPOUT STAINLESS STEEL 2" TRI-CLAMP CONNECTION 3A/FDA

Manufactured and imported directly from Japan, ULVAC DTC series diaphragm pumps feature integral forced-air cooling. They have two-stage PTFE diaphragms that are ideal for pumping corrosive gases and organic solvents. These pumps are oil-free, portable, and chemical-resistant, which means less maintenance and no more frequent and costly oil change, or cross contamination. These pumps are made in Japan with one year warranty and technical support from ULVAC.

Recommended for solvents with low or medium boiling points Vacuum can be controlled via valve operated or manual vacuum controllers

Control your house vacuum or any other vacuum source Pressure range from 0 to 1,020 mbar Scaling on display in steps of 50 mbar Connection for tubes with 8 mm inner diameter Support rod included A vacuum valve is not required Dimensions: L80 / W80 / H150 mm

Pharmaceutical Stainless Steel Freeze Dryer

Memmert Vacuum Pump